G256924t56: CHECK THE RIGHT-HAND REAR SIGNAL CIRCUIT FOR SHORT TO B+
- Disconnect the right-hand rear height sensor electrical connector, CV04.
- Measure the voltage between CV04, pin 04 (YG) and GROUND.
- Is the voltage greater than 3 volts?
- -> Yes: REPAIR the short circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t57: CHECK THE RIGHT-HAND REAR SIGNAL CIRCUIT FOR SHORT TO GROUND .