G256924t44: CHECK THE LEFT-HAND REAR HEIGHT SENSOR SUPPLY CIRCUIT FOR HIGH RESISTANCE
- Disconnect the left-hand rear height sensor electrical connector, CV03.
- Measure the resistance between CR90, pin 07 (BW) and CV03, pin 05 (BW).
- Is the resistance greater than 5 ohms?
- -> Yes: REPAIR the high resistance circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t45: CHECK THE RIGHT-HAND REAR HEIGHT SENSOR SUPPLY CIRCUIT FOR SHORT TO GROUND .