G256924t38: CHECK THE LEFT-HAND FRONT HEIGHT SENSOR SUPPLY CIRCUIT FOR HIGH RESISTANCE
- Disconnect the left-hand front height sensor electrical connector, EC45.
- Measure the resistance between CR90, pin 01 (G) and EC45, pin 05 (G).
- Is the resistance greater than 5 ohms?
- -> Yes: REPAIR the high resistance circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t39: CHECK THE RIGHT-HAND FRONT HEIGHT SENSOR SUPPLY CIRCUIT FOR SHORT TO GROUND .