Door Moulding: Removal
WARNING: This page is about a different car, the 2004 Jaguar XJR and 2004 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
- Apply suitable protective tape to adjacent areas of paintworks.
- Using a hand-held heat gun, apply heat uniformly along the moulding length.
- Applying local heat at one end and using a suitable nylon banding tape or string progessively ease the door moulding away from the door panel.
- Discard the moulding and remove protective tape.
- Remove any residual adhesive and thoroughly clean area using white spirit.
CAUTION:
Do not lever the door moulding away from the door panel. Faliure to follow this instruction may result in damage to the vehicle.