Brake Disc - Vehicles With: Standard Brakes, VIN Range: G00442->G45703 (70.10.11): Removal
- Remove the brake pads.
For additional information, refer to BRAKE PADS - VEHICLES WITH: STANDARD BRAKES, VIN RANGE: G00442->G45703 (70.40.03)
- Detach brake caliper anchor plate.
- Remove the brake disc.
- Remove and discard the brake disc retaining clips.
CAUTION:
The brake caliper must be supported at all times.
NOTE:
If the same brake disc is to be installed, the tip of a hub must be marked with a corresponding part of the brake disc for alignment.