Brake Disc - Vehicles With: High Performance Brakes, VIN Range: G00442->G45703 (70.10.11): Removal

Remove the parking brake pads. Refer to PARKING BRAKE PADS - VEHICLES WITH: HIGH PERFORMANCE BRAKES (70.40.04) .
Remove the brake pads.
1. Remove the brake pad retaining pins.
2. Remove the brake pad anti-rattle spring plate.
3. Remove the brake pads.
  
  Fig 1: Identifying Brake Pad With Retaining Pins And Anti-Rattle Spring Plate
  Courtesy of JAGUAR CARS, INC.

CAUTION: The brake caliper must be supported at all times.

Detach the brake caliper and secure to one side.
- Remove and discard the brake caliper retaining bolts.
  
  Fig 2: Locating Brake Caliper Retaining Bolts
  Courtesy of JAGUAR CARS, INC.

NOTE: If the same brake disc is to be installed, the tip of a hub must be marked with a corresponding part of the brake disc for alignment.

Remove the brake disc.
- Remove and discard the brake disc retaining clips.
  
  Fig 3: Locating Brake Disc Retaining Clips
  Courtesy of JAGUAR CARS, INC.