Brake Caliper - Vehicles With: High Performance Brakes, VIN Range: G00442- >G45703 (70.55.03): Removal

Remove the brake pads.
For additional information, refer to BRAKE PADS - VEHICLES WITH: HIGH PERFORMANCE BRAKES, VIN RANGE: G00442->G45703 (70.40.03)

CAUTION: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with the eyes. Wash hands thoroughly after handling, as prolonged contact may cause irritation and dermatitis. If brake fluid contacts the eyes, flush the eyes with cold water or eyewash solution and seek medical attention. If taken internally do not induce vomiting, seek immediate medical attention. Failure to follow these instructions may result in personal injury.

CAUTION: If brake fluid comes into contact with the paintwork, the affected area must be immediately washed down with cold water.

NOTE: To prevent the loss of brake fluid, apply the brake pedal hold-down tool and adjust to hold the brake pedal down 40 mm (1.6 in).

NOTE: Cap the brake hose to prevent loss of fluid and prevent dirt ingress.

Detach the brake hose.
- Remove and discard the sealing washers.
  
  Fig 1: Locating Sealing Washers
  Courtesy of JAGUAR CARS, INC.
Remove the brake caliper.
- Remove and discard the brake caliper retaining bolts.
  
  Fig 2: Locating Brake Caliper Retaining Bolts
  Courtesy of JAGUAR CARS, INC.