Vehicles with Brembo brakes
ITEM DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Brake caliper retaining bolts |
| 2 | - | Brake pads |
| 3 | - | Brake caliper |
| 4 | - | Brake disc retaining clips |
| 5 | - | Brake disc |
| 6 | - | Brake pad anti-rattle spring |
| 7 | - | Brake pad retaining pins |
For vehicles with Brembo brakes, the brake system consists of the following components:
- Brake pads
- Four piston, fixed calipers
- Brake discs
- Steel braided brake hoses
The brake caliper has two retaining bolts that attach the brake caliper to the wheel knuckle. These are of four piston fixed type which makes sure that equal effort is applied through both brake pads. The hydraulic system provides separate circuits for each pair of diagonally opposed wheels (i.e. left front, right rear and right front, left rear).
The brake disc is manufactured from cast iron and is of the solid type. It is retained on the hub by two retaining clips and the wheel studs.