Description and Operation: Bumpers

The vehicle is fitted with a chassis mounted aluminium beam and is covered by a one piece color co-ordinated front bumper cover. the fitment of the front fog lights is standard, which are mounted via brackets to the bumper covers. Inserts, side marker lamps/reflectors, and a dorchester grey splitter vane are fitted as standard. The parking aid sensors are mounted in the bumper cover and are fitted if the vehicle is equipped with a parking aid system. Headlamp washers are optional.

The rear bumper beam is of aluminium construction and is covered by a one piece color co-ordinated rear bumper cover. Inserts and side marker lamps/reflectors are fitted as standard. The parking aid sensors are mounted in the bumper cover and are fitted if the vehicle is equipped with a parking aid system.