Brake Master Cylinder - 2.7L Diesel (70.30.08): Removal

Remove the brake fluid reservoir.
For additional information, refer to BRAKE FLUID RESERVOIR (70.30.16)
Disconnect the brake booster vacuum pipe.

Fig 1: Locating Brake Booster Vacuum Pipe
Courtesy of JAGUAR CARS, INC.

CAUTION: If brake fluid comes into contact with the paintwork, the affected area must be immediately washed down with cold water.

NOTE: Cap the exposed ports to prevent dirt ingress and loss of fluid.

Fig 2: Locating Brake Master Cylinder Brake Pipes

Courtesy of JAGUAR CARS, INC.

Disconnect the brake master cylinder brake pipes.
Remove the brake master cylinder.
- Remove and discard the O-ring seal.
  
  Fig 3: Locating O-ring Seal
  Courtesy of JAGUAR CARS, INC.