Rear Wheel Bearing (64.15.14): Removal

Loosen the wheel hub nut.

Fig 1: Locating Wheel Hub Nut
Courtesy of JAGUAR CARS, INC.
Remove the brake disc.
For additional information, refer to BRAKE DISC - VEHICLES WITH: STANDARD BRAKES, VIN RANGE: G00442->G45703 (70.10.11) For additional information, refer to BRAKE DISC - VEHICLES WITH: HIGH PERFORMANCE BRAKES, VIN RANGE: G00442->G45703 (70.10.11)

For additional information, refer to BRAKE DISC - VIN RANGE: G45704->G99999 (70.10.11)
Detach the anti-lock brake system (ABS) sensor.

Fig 2: Locating Anti-Lock Brake System (ABS) Sensor Bolt
Courtesy of JAGUAR CARS, INC.
Detach the outer tie rod.

Fig 3: Locating Outer Tie Rod Retaining Bolt
Courtesy of JAGUAR CARS, INC.
Detach the lower arm from the wheel knuckle.

Fig 4: Locating Wheel Knuckle Bolt
Courtesy of JAGUAR CARS, INC.
Remove the wheel hub nut.
Using the special tools, detach the halfshaft.

Fig 5: Detaching Halfshaft Using Special Tools
Courtesy of JAGUAR CARS, INC.
Remove the wheel knuckle assembly.

Fig 6: Identifying Wheel Knuckle Assembly Bolt
Courtesy of JAGUAR CARS, INC.
Using the special tools, remove the wheel hub from the bearing.

Fig 7: Removing Wheel Hub From Bearing Using Special Tools
Courtesy of JAGUAR CARS, INC.
Using the special tools, remove the inner bearing race from the hub.

Fig 8: Removing Inner Bearing Race From Hub Using Special Tools
Courtesy of JAGUAR CARS, INC.
Remove the circlip.

Fig 9: Locating Circlip
Courtesy of JAGUAR CARS, INC.
Using the special tools, remove the bearing from the wheel knuckle.

Fig 10: Removing Bearing From Wheel Knuckle Using Special Tools
Courtesy of JAGUAR CARS, INC.