LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2003 >> XJR >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake And Actuation (2003.5-09) >> Removal and Installation >> Parking Brake Release Actuator - VIN Range: G03446->H99999 (70.35.45) >> Removal

Parking Brake Release Actuator - VIN Range: G03446->H99999 (70.35.45): Removal

  1. Carry out the parking brake cable tension release.

    For additional information, refer to PARKING BRAKE CABLE TENSION RELEASE - VIN RANGE: G45704->G99999 

  2. Drain the fuel tank.

    For additional information, refer to FUEL TANK DRAINING - VIN RANGE: G45704->G99999 .

  3. Raise and support the vehicle.

    For additional information, refer to JACKING AND LIFTING (2003.5-09) .

  4. Disconnect the parking brake release actuator electrical connector.
    Fig 1: Locating Parking Brake Release Actuator Electrical Connector
    G06387704Courtesy of JAGUAR CARS, INC.
  5. NOTE: Left-hand shown, right-hand similar.
    Fig 2: Locating Air Springs Bolt
    G06387712Courtesy of JAGUAR CARS, INC.
  6. Detach the air springs.
  7. Detach the fuel tank filler pipe.
    Fig 3: Locating Fuel Tank Filler Pipe
    G06387713Courtesy of JAGUAR CARS, INC.
  8. NOTE: Right-hand shown, left-hand similar.
    Fig 4: Locating Muffler And Tail Pipe Of Hanger Insulator
    G06387714Courtesy of JAGUAR CARS, INC.
  9. Detach the muffler and tail pipe from the hanger insulator.
  10. Install the special tool to support the rear subframe.
    Fig 5: Supporting Rear Subframe With Special Tool (HTJ 1200-2)
    G06387274Courtesy of JAGUAR CARS, INC.
  11. NOTE: Left-hand shown, right-hand similar.
    Fig 6: Locating Noise, Vibration And Harshness Brace Retaining Bolts
    G06387275Courtesy of JAGUAR CARS, INC.
  12. Remove the noise, vibration and harshness brace retaining bolts.
  13. NOTE: Left-hand shown, right-hand similar.
    Fig 7: Locating Rear Subframe Rear Retaining Bolt
    G06387276Courtesy of JAGUAR CARS, INC.
  14. Remove and discard the rear subframe rear retaining bolts.
  15. NOTE: Left-hand shown, right-hand similar.
  16. Remove the noise, vibration and harshness brace.
    • Remove and discard the rear subframe front retaining bolts.
      Fig 8: Locating Rear Subframe Front Retaining Bolt
      G06387277Courtesy of JAGUAR CARS, INC.
  17. Lower the subframe to a maximum of 60 mm.
    Fig 9: Identifying Subframe Front Lowering Distance
    G06387719Courtesy of JAGUAR CARS, INC.
  18. Remove and discard the cross brace retaining bolts.
    • Reposition the cross brace.
      Fig 10: Locating Cross Brace Retaining Bolts
      G06387720Courtesy of JAGUAR CARS, INC.
  19. Remove the parking brake release actuator retaining bolts.
    Fig 11: Locating Parking Brake Release Actuator Retaining Bolts
    G06387706Courtesy of JAGUAR CARS, INC.
  20. Detach the parking brake release actuator cable.
    Fig 12: Detaching Parking Brake Release Actuator Cable
    G06387722Courtesy of JAGUAR CARS, INC.
  21. Detach the parking brake release actuator cable.
    1. 1) For right-hand side connector bracket:
      • Reposition the retaining tang.
      • Detach the parking brake cable.
    2. 4) For left-hand side reaction bracket, detach the parking brake cable.
      Fig 13: Identifying Connector Bracket And Reaction Bracket
      G06387723Courtesy of JAGUAR CARS, INC.
  22. Remove the parking brake release actuator.
    Fig 14: Removing Parking Brake Release Actuator
    G06387724Courtesy of JAGUAR CARS, INC.