G240070t22 : CHECK THE POWER SUPPLY CIRCUIT TO THE THROTTLE MOTOR RELAY COIL
- Turn the ignition switch to the RUN position.
- Measure the voltage between the throttle motor relay connector FH 32D pin 1 (GR) and ground.
- Is the voltage greater than 10 volts?
- -> Yes : GO to G240070t23 : CHECK CONTINUITY OF THE THROTTLE MOTOR RELAY COIL .
- -> No : REPAIR the throttle motor relay coil power supply circuit from the engine compartment fuse box. CLEAR the DTC. TEST the system for normal operation.