Instrument Cluster (88.20.01): Removal

Adjust steering column to fully extended and lowered position.
Remove battery cover and disconnect ground cable from battery terminal. Refer to BATTERY GROUND CABLE .
Remove veneer from instrument panel. Refer to INSTRUMENT CLUSTER FINISH PANEL .
Using a small screwdriver, depress fog lamp switch upper retaining tang and release switch from gauge surround.

Fig 1: Releasing Fog Lamp Switch From Gauge Surround
Courtesy of JAGUAR CARS, INC.
Position fog lamp switch for access, disconnect harness multiplug and remove switch.

Fig 2: Disconnecting Fog Lamp Switch Harness Multiplug And Removing Switch
Courtesy of JAGUAR CARS, INC.
Using a small screwdriver, depress trip keyboard upper retaining tang and release keyboard from gauge surround.

Fig 3: Releasing Trip Keyboard From Gauge Surround
Courtesy of JAGUAR CARS, INC.
Position trip keyboard for access and disconnect harness multiplug.

Fig 4: Disconnecting Trip Keyboard Harness Multiplug
Courtesy of JAGUAR CARS, INC.
Slacken and remove four screws securing major gauge module/surround to fascia and withdraw surround.

Fig 5: Removing Major Gauge Module Surround
Courtesy of JAGUAR CARS, INC.
Withdraw major gauge module for access, disconnect the two harness multiplugs and remove gauge module from fascia.

Fig 6: Removing Gauge Module From Fascia
Courtesy of JAGUAR CARS, INC.