Hydraulic Brake Actuation: Specification
LUBRICANTS, FLUIDS, SEALANTS AND ADHESIVES SPECIFICATIONS
| Unit | Specification |
|---|---|
| Brake fluid | ITT Super Dot 4 |
TORQUE SPECIFICATIONS
| Component | Nm |
|---|---|
| Nut - master cylinder to brake booster | 21-29 |
| Nut - brake pedal pivot-pin to pedal housing | 15-20 |
| Nut - brake switch to pedal housing | 3 |
| Bolt - pedal housing to body | 15-20 |
| Nut - pedal housing to body | 15-20 |
| Nut - brake booster to pedal housing | 22-28 |
TORQUES - BREMBO BRAKES SPECIFICATIONS
| Component | Nm |
|---|---|
| Bleed nipple | 12-16 |
| Union bolt - brake hose to caliper | 22-26 |
CAUTION:
Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict the number of times a nut or bolt can be used. See THREAD LOCKING DEVICES
for information.
BRAKE TUBE, HOSES AND BRACKET TORQUES SPECIFICATIONS
| Component | Nm |
|---|---|
| Bleed nipple - front | 4-6 |
| Bleed nipple - rear | 8-11 |
| Hose to front caliper | 10-14 |
| Union bolt - hose to rear caliper | 30-40 |
| M10 hose locknut | 15-20 |
| M10 brake tube female-nut | 13-17 |
| M10 brake tube male-nut | 13-17 |
| M12 brake tube male-nut | 15-20 |
| Bolt - 3-way tube connector to body | 9-12 |