LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XK8 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and installation >> Selector Lever Gate Finish Panel >> Installation

Selector Lever Gate Finish Panel: Installation

  1. Ensuring correct orientation, fit and fully seat Sport mode and Cruise Control on/off switches in surround.
  2. Position surround for access and connect switch harness multiplugs.
  3. Position surround over "J" gate and press firmly to fully seat tangs.
  4. Remove protective tape from veneer panel.
scientia non olet · About LEMON Manuals