LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XK8 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and installation >> Rear Cup Holder >> Installation

Rear Cup Holder: Installation

  1. Fit and fully seat trim panel to cup holder lid ensuring that panel hook engages lid and panel engages lid damper wire.
  2. Fit and tighten screws securing trim panel to cup holder lid.
  3. Fit and fully seat cupholder and trim panel assembly to glove box lid.
  4. Position cup holder latch and fit and tighten securing screw.
  5. Fit hinge to glove box lid.
  6. Fit and fully seat inner finisher to glove box lid and fit and tighten securing screws.
  7. Close cup holder lid, position glove box lid assembly on center console and fit and tighten securing screws.
  8. Close center console glove box lid.
scientia non olet · About LEMON Manuals