LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XK8 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and installation >> Glove Compartment >> Installation

Glove Compartment: Installation

  1. Position glovebox at fascia cross-member and connect footwell and glovebox lamp multiplugs.
  2. Locating plastic dowels in apertures, seat glovebox on cross-member.
  3. Install but do not fully tighten lower securing screws.
  4. Install but do not fully tighten glovebox upper securing screws.
  5. Carefully close glovebox lid and align assembly with fascia.
  6. Fully tighten all glovebox securing screws.
scientia non olet · About LEMON Manuals