LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XJR 100 >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake & Actuation >> Removal and installation >> Parking Brake Control Shroud >> Installation

Parking Brake Control Shroud: Installation

  1. Slide trim over handbrake lever and position lower moulding over boss.
  2. Fasten press stud at top of trim.
  3. Check that 'J' gate selector is in position P.
  4. Lower handbrake lever, checking for freedom of movement.
  5. Pull handbrake lever fully up.
scientia non olet · About LEMON Manuals