LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XJR 100 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and Installation >> Floor Console Finish Panel Bracket >> Installation

Floor Console Finish Panel Bracket: Installation

  1. Fit and fully seat new bushes in retaining panel.
  2. Fit and fully seat SPORT mode and cruise control ON/OFF switches in retaining panel.
  3. Position retaining panel for access and connect SPORT mode and cruise control ON/OFF switch multiplugs.
  4. Fully seat retaining panel and fit and tighten securing nuts and screws.
  5. Fit 'J' gate surround finisher. Refer to SELECTOR LEVER GATE FINISH PANEL for XJR or SELECTOR LEVER GATE FINISH PANEL for XJ8.
scientia non olet · About LEMON Manuals