LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2001 >> XJR >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and Installation >> Rear Cup Holder >> Installation

Rear Cup Holder : Installation

  1. Fit trim panel assembly to cupholder mechanism.
  2. Fit and tighten the trim panel securing screws.
  3. Fit and fully seat cupholder mechanism, ensuring tangs are fully engaged.
  4. Fit and tighten lid inner securing screws.
  5. Fit cupholder latch and tighten securing screw.
  6. Fit glovebox lid. Refer to FLOOR CONSOLE STOWAGE COMPARTMENT LID  .
scientia non olet · About LEMON Manuals