LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2001 >> XJR >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and Installation >> Instrument Cluster Finish Panel Bezel >> Installation

Instrument Cluster Finish Panel Bezel: Installation

  1. Position major gauge surround on panel, routing harness multiplugs through apertures.
  2. Fit and tighten screws securing major gauge module/surround to fascia.
  3. Connect harness multiplug to trip keyboard and fit and fully seat keyboard in gauge surround, ensuring correct location of retaining tangs
  4. Connect harness multiplug to fog lamp switch and fit and fully seat switch in gauge surround, ensuring correct location of tangs.
  5. Fit veneer panel. Refer to INSTRUMENT CLUSTER FINISH PANEL  .
  6. Connect ground cable to battery terminal and fit battery cover. Refer to BATTERY CONNECT .
  7. Return steering column to original position.
scientia non olet · About LEMON Manuals