LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2001 >> XJR >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and Installation >> Glove Compartment Liner >> Installation

Glove Compartment Liner: Installation

  1. Route illumination switch harness into switch housing.
  2. Connect switch to harness multiplugs and fit and fully seat switch in housing.
  3. Secure harness in liner clips.
  4. Fit lid damper to liner. Refer to GLOVE COMPARTMENT LID DAMPER  .
  5. Fit damper cord guide to bracket.
  6. Route damper cord through guide and connect to damper.
  7. Fit glovebox lid. Refer to GLOVE COMPARTMENT LID  .
  8. Fit glovebox. Refer to GLOVE COMPARTMENT  .
scientia non olet · About LEMON Manuals