LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2001 >> XJR >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and Installation >> Floor Console Finish Panel >> Installation

Floor Console Finish Panel: Installation

  1. Position veneer panel on console, ensuring that front tongue locates correctly in console upper slot.
  2. Fit and fully seat new bushes in retaining panel.
  3. Position retaining panel complete with SPORT mode and cruise control ON/OFF switches for access and connect multiplugs.
  4. fully seat retaining panel and fit and tighten securing nuts and screws.
  5. Fit 'J' gate surround finisher. Refer to SELECTOR LEVER GATE FINISH PANEL  .
  6. Move gear selector to position P.
  7. Connect ground cable to battery terminal and fit battery cover. Refer to BATTERY CONNECT .
scientia non olet · About LEMON Manuals