Floor Console Ashtray: Installation
- Position ashtray on center console.
- Fit and tighten the four ashtray securing screws.
- Fit and fully seat cigar lighter housing in ashtray and fit and tighten retaining ring.
- Fit cigar lighter housing and illumination bulb.
- Tape cables to underside of console.
- Fit cigar lighter in housing.
- Close ashtray lid.
- Fit center console assembly. Refer to FLOOR CONSOLE .
- Connect multiplug at rear of center console.
- Fit center console rear air distribution control grill.
- Connect ground cable to battery terminal and fit battery cover. Refer to BATTERY CONNECT .