Battery Connect
- Connect the battery terminal(s).
- Reset the clock.
- Enter the radio security code. If necessary, refer to the Sound System Handbook.
- Cycle (both) door drop glass up and down to establish the upper and lower datum points.
- Switch the ignition ON.
- Lower the glass to the stop and hold the switch in the DOWN position for a further five seconds.
- Raise the glass fully and hold the switch in the UP position for a further five seconds.
- Switch the ignition OFF.
NOTE:
Whether one, or both, cables are disconnected, a minimum of 30 seconds MUST elapse between disconnection of the FIRST cable and reconnection of the LAST cable. A clean final connection must be made; do not allow temporary contact.