Removal & Installation (XK8)
- Open driver door and ensure that it remains open. Move driver's seat fully rearward.
- Remove key from ignition switch. Remove cowl securing screws and separate lower cowl from upper cowl (4 tangs). Move lower cowl forward to access connectors. Disconnect rheostat connector.
- Disconnect column adjustment harness connector. Move lower cowl clear of steering column. Remove rheostat from cowl and remove adjusting knob from rheostat. Remove rheostat securing screw.
- Move retaining tangs away from column adjustment switch and release the switch from lower cowl. Remove lower cowl from steering column. Remove rheostat switch from lower cowl. To install, reverse removal procedure.