Hub Carrier: Removal
- Raise and support vehicle. Disconnect parking brake cable from hub carrier. Remove brake caliper, and wire aside. Release parking brake shoe adjuster. Remove brake disc. Position cutout in hub toward front parking brake shoe. Remove front parking shoe spring cup washer, spring and inner cup washer.
- Position cutout in hub towards rear parking brake shoe. Remove rear shoe spring cup washer, spring and inner cup washer. Remove upper parking brake shoe adjuster and connecting spring. Remove lower parking brake shoe connecting spring.
- Remove fulcrum shaft nut. Remove cotter pin, hub nut and washer from end of axle shaft. Place thread protector on end of axle shaft. Mount hub puller on hub. Disconnect hub and carrier from axle shaft. Remove fulcrum shaft. Remove hub carrier.