Rear Door Window Switch

RENEW

- Disconnect the battery earth lead.

- Remove the rear door armrest. Service and Repair

- Remove the rear door lower trim pad for access. Service and Repair

- Remove the rear door pocket.





- Displace and remove the window switch assembly end cover trim pad (Fig. 1).

- Remove the veneer panel to switch securing screw (Fig. 1).

- Remove the veneer panel from the forward securing clip (Fig. 1).

- Remove the switch / ashtray assembly securing nuts and screws.

- Displace the switch / ashtray assembly from the door pocket and carefully release the retaining tangs to remove the switch.

- Fitting a new rear door window switch is a reversal of the removal procedure.