LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 1988 >> XJ-SC >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel & Column Switches >> Removal & Installation >> Steering Lock & Ignition Switch >> Installation

Steering Lock & Ignition Switch: Installation

  1. To install, reverse removal procedure. Install new shear bolts. Tighten shear bolts finger tight. Ensure proper operation of steering lock and ignition switch.
  2. Tighten shear bolts until heads break off. Install combination switch, upper and lower steering column covers and steering wheel.
scientia non olet · About LEMON Manuals