LEMON Manuals
: Even more car manuals for everyone
Home
>>
Isuzu
>>
2008
>>
i-290 Automatic
>>
Repair and Diagnosis
>>
Transmission
>>
Hydraulic Diagrams
>>
Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis
>>
Off-Vehicle Repair Information
>>
Turbine Shaft O-Ring Installation
Turbine Shaft O-Ring Installation
Fig 1: Identifying Turbine Shaft O-Ring
Courtesy of GENERAL MOTORS CORP.
Install the O-ring (618) on the turbine shaft. O-Ring location is location dependent.
Courtesy of GENERAL MOTORS CORP.