Radio Scan Tool Information
Radio
| Scan Tool Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition in RUN, Radio ON | |||
| Balance | __ | -50 to +50 | The scan tool displays -50 to +50. The Balance between the right and left audio output. |
| Bass | __ | 0-100% | The scan tool displays 0-100%. The percentage of bass selected at the radio. |
| Battery Voltage | __ | 0-18V | The scan tool displays 0-18 Volts. The Voltage measured from the modules ignition positive voltage circuit to ground. |
| Fade | __ | -50 to +50 | The scan tool displays -50 to +50. The Fade between the front and rear audio output. |
| Ignition Since Current DTC | __ | 0-225 | The scan tool displays 0-225 Cycles. The number of ignition cycles since a current DTC was set. |
| Signal Strength | __ | 0-225 | The scan tool displays 0-225 dB. The signal strength of the radio frequency. |
| Treble | __ | 0-100% | The scan tool displays 0-100%. The percentage of treble selected at the radio. |
| Volume | __ | 0-100% | The scan tool displays 0-100%. The percentage of volume selected at the radio. |