LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 2.9L >> Repair Instructions - Off Vehicle >> Engine Flywheel Cleaning and Inspection (Manual Transmission)

Engine Flywheel Cleaning and Inspection (Manual Transmission)

    IMPORTANT: In order to maintain the proper component balance, contact surface taper and heat transfer, manual transmission flywheels are NOT to be machined.
    Fig 1: Inspecting Engine Flywheel For Damage - Manual Transmission
    GM954122Courtesy of GENERAL MOTORS CORP.
  1. Inspect the engine flywheel for damaged teeth (1).
  2. Inspect the engine flywheel for cracks, hot spots, or any surface damage (2).
  3. Replace the engine flywheel if damage is present.
scientia non olet · About LEMON Manuals