LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Cushion Frame Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

    Fig 1: Rear Seat Cushion - Extended Cab
    GM1333784Courtesy of GENERAL MOTORS CORP.
  1. Install the seat cushion cover over the seat frame/pad.
  2. Install the J-strips (2) on the cover (1).
  3. Install the rear folding seat cushion in the vehicle. Refer to Folding Seat Replacement (Extended Cab) .
scientia non olet · About LEMON Manuals