LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Cushion Cover and Pad Replacement (Crew Cab) >> Installation Procedure

Installation Procedure

    Fig 1: Rear Seat Cushion - Crew Cab
    GM1333682Courtesy of GENERAL MOTORS CORP.
  1. Install the seat cushion cover and pad over the seat frame (2).
  2. Install the J-strips (1) on the cover.
    3. Fig 2: View Of Seat Belt Buckles & Seat Cover Loops
    GM1333692Courtesy of GENERAL MOTORS CORP.
  3. Install the seat belt buckles (1) through the seat cover loops (2).
  4. Install the rear bench seat in the vehicle. Refer to Rear Bench Seat Replacement .
scientia non olet · About LEMON Manuals