LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Back Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Back - Extended Cab
    GM1276839Courtesy of GENERAL MOTORS CORP.
  1. Position the rear seat back by aligning the hooks with the slots in the vehicle.
  2. Install the rear seat back by pushing the seat back downward.