LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Back Replacement (Crew Cab) >> Removal Procedure

Removal Procedure

  1. Release the rear seat back latches.
    2. Fig 1: View Of Seat Cushion Frame Side Trim Covers
    GM1361325Courtesy of GENERAL MOTORS CORP.
  2. Remove the screw securing the side trim covers to the seat cushion frame.
    3. Fig 2: View Of Seat Back Frame To Seat Cushion Frame Bolt
    GM1361333Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt securing the seat back frame to the seat cushion frame.
    4. Fig 3: View Of Seat Back Frame - Crew Cab
    GM1361350Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat back frame by pulling the frame off the seat cushion frame stud.
  5. Inspect the white nylon bushing on the seat back frame for wear or damage and replace if necessary.
scientia non olet · About LEMON Manuals