LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Back Latch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the rear bench seat cushion from the vehicle. Refer to Rear Bench Seat Replacement .
  2. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Crew Cab) .
    3. Fig 1: View Of Latch Release Strap Bracket
    GM1333703Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 screws (2) securing the latch release strap bracket (1) to the seat back frame.
    4. Fig 2: View Of Latch Assembly
    GM1333780Courtesy of GENERAL MOTORS CORP.
  4. Remove the 4 screws (2) securing the latch assembly (1) to the seat back frame.
  5. Remove the seat back latch from the seat back frame.
scientia non olet · About LEMON Manuals