LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Frame Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

  1. Install the seat back cover over the seat back frame/pad.
    2. Fig 1: View Of Seat Back Pad - Extended Cab
    GM1333708Courtesy of GENERAL MOTORS CORP.
  2. Install the hog rings (1) on the cover (2).
  3. Install the rear seat back in the vehicle by aligning the hooks in the slots and pushing the seat back downward.
scientia non olet · About LEMON Manuals