LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Cover and Pad Replacement (Crew Cab) >> Removal Procedure

Removal Procedure

  1. Remove the rear bench seat from the vehicle. Refer to Rear Bench Seat Replacement .
  2. Remove the rear head rest restraints, if equipped. Refer to Rear Seat Head Restraint Replacement .
    3. Fig 1: Seat Back Cover J-Strip - Crew Cab
    GM1333699Courtesy of GENERAL MOTORS CORP.
  3. Release the J-strip (1) on the bottom edge of the seat back cover.
  4. Remove the seat cushion cover and pad from the seat frame.
  5. Remove the hog rings securing the cover to the pad.
scientia non olet · About LEMON Manuals