LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Back Cushion Cover and Pad Replacement (Crew Cab) >> Installation Procedure

Installation Procedure

  1. Install the hog rings securing the cover to the pad.
  2. Install the seat cushion cover and pad over the seat frame.
    3. Fig 1: Seat Back Cover J-Strip - Crew Cab
    GM1333699Courtesy of GENERAL MOTORS CORP.
  3. Install the J-strip (1) on the cover.
  4. Install the rear head rest restraints, if equipped. Refer to Rear Seat Head Restraint Replacement .
  5. Install the rear bench seat in the vehicle. Refer to Rear Bench Seat Replacement .
scientia non olet · About LEMON Manuals