LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Bench Seat Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Bench Seat
    GM1276836Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 nuts securing the front legs of the rear bench seat to the floor studs.
  2. Remove the 2 nuts securing the rear of the rear bench seat to the floor studs.
  3. Remove the rear bench seat from the vehicle.
scientia non olet · About LEMON Manuals