LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Front Seat Replacement - Bucket >> Removal Procedure

Removal Procedure

    IMPORTANT: If removing both front power seats, remove the passenger seat first. Power to the passenger seat is terminated once the driver's seat is disconnected.
    Fig 1: View Of Front Bucket Seat
    GM1276835Courtesy of GENERAL MOTORS CORP.
  1. Ensure that the seat is all the way rearward.
  2. Remove the bolt covers and front bolts.
  3. Ensure that the seat is all the way forward.
  4. Remove the rear bolts.
  5. Disconnect the seat electrical connectors to the body harness.
  6. Remove the seat from the vehicle.
scientia non olet · About LEMON Manuals