LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Front Seat Head Restraint Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Head Restraint Retainer Port And Release Tab
    GM752741Courtesy of GENERAL MOTORS CORP.
  1. Raise the head restraint to the full up position by pressing the release tab (2), and by lifting up the head restraint.
  2. Insert a small tool into the head restraint retainer port (1).
  3. In order to release the head restraint retainer, simultaneously lift up on the head restraint while applying inward pressure to the tool in the retainer release port (1).
  4. Remove the head restraint from the seat assembly.
scientia non olet · About LEMON Manuals