LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Front Seat Head Restraint Guide Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front seat assembly. Refer to Front Seat Replacement - Bucket  or Split Bench Seat Replacement .
  2. Remove the front seat head restraint. Refer to Front Seat Head Restraint Replacement .
  3. Pull the seat back cover and the seat back pad up high enough to expose the head restraint guides. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
    4. Fig 1: Head Restraint Guides
    GM752738Courtesy of GENERAL MOTORS CORP.
  4. Squeeze the retaining tabs located at the bottom of the guides together in order to remove the guides from the seat frame.
  5. Remove the guides from the seat back frame.
scientia non olet · About LEMON Manuals