LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Front Seat Head Restraint Guide Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Seat Back Frame Retainer
    GM752740Courtesy of GENERAL MOTORS CORP.
  1. Install the guides to the seat back frame, verifying that the lower retainers are fully seated to the frame.
    2. Fig 2: View Of Head Restraint Guide Locking Tab
    GM752739Courtesy of GENERAL MOTORS CORP.
  2. Install the guide with the locking tab (1) on the seat's right-hand side.
  3. Install the seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  4. Install the front seat head restraint. Refer to Front Seat Head Restraint Replacement .
  5. Install the seat assembly. Refer to Front Seat Replacement - Bucket  or Split Bench Seat Replacement .
scientia non olet · About LEMON Manuals