LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Front Seat Back Frame Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Recliner Mounting Bolts
    GM1333670Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the seat back frame to the seat back recliner mechanism with 4 bolts (1).

    Tighten:  Tighten the front seat recliner bolts to 24 N.m (18 lb ft).

  2. Install the lumbar assembly. Refer to Front Seat Lumbar Support Replacement .
  3. Install the seat back pad and cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
  4. Install the seat in the vehicle. Refer to Split Bench Seat Replacement  or Front Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals