LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement >> Removal Procedure

Removal Procedure

  1. Remove the seat from the vehicle. Refer to Split Bench Seat Replacement  or Front Seat Replacement - Bucket .
  2. Remove the front seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
    3. Fig 1: View Of Seat Back Panel & Fasteners
    GM1333666Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 hog ring fasteners (3) on the bottom of the seat back panel (2).
  4. Remove the push-pin fastener (1) from the top of the seat back panel.
  5. Remove the seat-back panel.
scientia non olet · About LEMON Manuals