LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2008 >> i-290 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Cushion Cover and Pad Replacement (Crew Cab) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Seat Belt Buckles & Seat Cover Loops
    GM1333692Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear bench seat from the vehicle. Refer to Rear Bench Seat Replacement .
  2. Remove the seat belt buckles (1) from the seat cover loops (2).
    3. Fig 2: Rear Seat Cushion - Crew Cab
    GM1333682Courtesy of GENERAL MOTORS CORP.
  3. Release the J-strips (1) on the cover.
  4. Remove the seat cushion cover and pad from the seat frame (2).
scientia non olet · About LEMON Manuals