Third and Fourth Clutch Backing Plate Selection
WARNING: This page is about a different variant/trim than selected.
3rd and 4th Clutch Backing Plate Selection Table
| Dimension |
Identification |
| 5.88-5.68 mm (0.231-0.224 in) |
A |
| 4.99-4.76 mm (0.196-0.187 in) |
B |
| 4.10-3.90 mm (0.161-0.154 in) |
C |
| Use a backing plate which gives the correct travel. The travel should be 2.10-0.90 mm (0.083-0.035 in). |